Centrifugal pumps
In centrifugal pumps the energy is transferred hydrodynamically.In the hydrodynamic transfer of energy the fluid is accelerated by the impeller of the centrifugal pump. Therefore, the impeller of the centrifugal pump has to move with high velocity and thus a high rotational speed.
HM 150.04
Centrifugal pump
Determining the characteristics of a typical centrifugal pump.
HM 150.16
Series and parallel configuration of pumps
Characteristic curves and hydraulic power; comparison of operating modes.
HM 450C
Characteristic variables of hydraulic turbomachines
Determination of output and efficiency of turbines and pumps; demonstration of a pumped storage plant.
HM 283
Experiments with a centrifugal pump
Two-shaft arrangement with high-pressure turbine and power turbine using liquid gas.
HM 284
Series and parallel configuration of pumps
Demonstration of series, parallel and the individual operation of centrifugal pumps.
HM 300
Hydraulic circuit with centrifugal pump
Two-shaft arrangement with high-pressure turbine and power turbine using liquid gas.
HM 305
Centrifugal pump trainer
Demonstration of series, parallel and the individual operation of centrifugal pumps.
HM 332
Pump characteristics for parallel and series configuration
Investigation of the behaviour of two identical centrifugal pumps in operation.
HM 362
Comparison of pumps
Investigate operating behaviour of centrifugal pumps, piston pump and side channel pump.
HL 960.01
Assembly and alignment of pumps and drives
Installation and removal of pumps in plants; water supply for HL 960.
HL 962
Assembly stand for pumps
Base unit when constructing a complex piping system.
HL 962.01
Standard chemicals pump
Typical pump as used in process engineering.
HL 962.02
Canned motor pump
Hermetic centrifugal pump, particularly suitable for pumping liquid gases.
HL 962.04
Standard chemicals pump with magnetic clutch
Hermetic centrifugal pump according to ISO 5199.
HM 365.11
Centrifugal pump, standard design
Standard pumps are pumps that are designed in accordance with international standards.
HM 365.12
Centrifugal pump, self-priming
Self-priming pumps are able to suck in and transport air and water.
HM 365.13
Centrifugal pump, multistage
In centrifugal pumps with multiple stages several impellers are arranged in series.
HM 365.14
Centrifugal pumps, series and parallel connected
Self-priming pumps are able to suck in and transport air and water.
HM 405
Axial-flow turbomachines
Function of a turbomachine; configuration as pump or turbine with interchangeable rotor/impeller and stator/guide vane system.
MT 180
Assembly & maintenance exercise: centrifugal pump
Understanding design and function of the pump; planning and executing assembly, disassembly and maintenance.
MT 181
Assembly & maintenance exercise: multistage centrifugal pump
Understanding design and function of the pump; planning and executing assembly, disassembly and maintenance.
MT 185
Assembly & maintenance exercise: in-line centrifugal pump
Understanding design and function of the pump; planning and executing assembly, disassembly and maintenance.
VIETNAM | Ho Chi Minh City |Solution Center
VIETNAM | Hanoi| Solution Center
